|
|
Post by gofish1979 on Apr 20, 2011 13:34:06 GMT -4
Sorry for all the questions and as you can tell by my others I haven't bought cranks in a while. I haven't really needed to because I bought volume back then.
I did not know the rattling version is discontinued.
I have 1-3/4, 2-1/8 & 2-3/4 inch versions.
Can you help me with depths and model#'s.
Sorry for all the question on these but this is the only helpful site on the internet for Rapala.
Thanks,
Travis
|
|
|
|
Post by bacon on Apr 20, 2011 16:52:48 GMT -4
Sorry for all the questions and as you can tell by my others I haven't bought cranks in a while. I haven't really needed to because I bought volume back then. I did not know the rattling version is discontinued. I have 1-3/4, 2-1/8 & 2-3/4 inch versions. Can you help me with depths and model#'s. Sorry for all the question on these but this is the only helpful site on the internet for Rapala. Thanks, Travis the 1.75" is a size 4, the 2.125" is a size 5, and the 2.75" is a 7. i think these have a chart somewhere, but i can give a close approx 4 should be 4-5 ft 5 maybe up to 8 and 7's might run in the 10' area i hope someone might be able to give closer numbers bacon |
|
|
|
Post by jmcfish10101973 on Apr 23, 2011 10:54:44 GMT -4
|
|
|
|
Post by happyshad on Apr 25, 2011 9:24:27 GMT -4
For trolling depths - the best advice I could give you would be to buy book "Precision Trolling" - Author - Mark Romanack. It has dive curves for most of the crank baits out there - and is also a good source of info for referencing lures - it has a "to scale" photo of each bait. Based on 10 pound Berkley Trilene XT line.
|
|
